99视频久九热精品

 Logo Logo

 Hotline

 Logo (small)

Key words:

National Service Hotline

0755-88827719

Automatic injection equipment with flexible plastic shell

Release time: October 8, 2019 14:50:22

According to our company's current product spraying parameters and painting process requirements, and in line with our brand positioning and development strategy, it is suitable for flexible production, that is, it can carry out the fully automatic shell painting production. The maximum passing product is the workpiece with a rotating diameter of 450mm (the corner position must reach 450mm). All products are fixed by twice fixture and can meet the product quality requirements.

 

The design of the production line is based on the principles of safety, energy saving, economy and reliability, with reasonable layout, good accessibility, strong operability, smooth logistics and convenient maintenance Fuel injection equipment Fixed gun spraying mode is adopted (4 expansion interfaces are reserved for each spray cabinet, which can be added if necessary in the later stage) Spraying robot Automatic mode).

 

Coating object: plastic shell and other metal and plastic products that can pass through

This coating line is specially designed for the coating of plastic shell and related metal products and similar products. Its functions include: coating of common plastic paint, metallic paint and UV paint.

Plastic shell automatic line process: three coating and three baking.

? unpacking → PVC with upper fixture → turning on line → preheating and dehumidification → automatic electrostatic precipitator → primer spraying (fixed gun spraying) → primer leveling → primer surface drying → primer drying (adjustable at room temperature - 180 ° C) → cooling → automatic electrostatic precipitating → 2 ᦇ color paint spraying (fixed gun spraying) → color paint leveling → color paint surface drying → color paint drying (adjustable at room temperature - 180 ° C) → cooling → 3 ᦇ spraying UV paint Room (fixed gun spraying) → UV paint leveling → UV paint surface drying → UV curing (6 sets of lamps, primarc brand, 5.6kw) → cooling → next part inspection

 

Automatic fuel injection equipment design code

1. Coating conveyor spindle spacing: 50 mm (the maximum passing diameter is 450 mm).

2. Conveyor speed: 6.0m/min, (3-9m / min adjustable).

3. Design output: 10000 pieces / day (10 hours continuous working).

4. Spraying method: fixed gun (manipulator can be installed as required in later stage)

5. Chain rail length: the total length of the line is 300m * 2.

6. Heating mode: electric heating (increase hot air circulation).

 

Copyright? 2010 Shenzhen Zhicheng robot automation equipment Co., Ltd. all rights reserved Yue ICP Bei 09172304-1

  •  This site supports multi terminal browsing This site supports multi terminal browsing